Tag: jeep
-
No snow yet, spent Sunday Jeepin’ instead. 🙂
https://youtu.be/KRgeoy5Chqk
-
NBD, just pulling a burnt Jeep out of a trail. 🙂
https://youtu.be/4DQ1G7z79eQ
A guy’s Jeep TJ was set on fire in a trail, after the parts were stolen off it. So we pulled it out, to clean the trail, do a friend a favour, and get it recycled. We pulled the engine, transmission, and transfer case out first, which I had in a trailer behind my Jeep, and a friend sledded the carcass off its then-smooth bottom & frame.
-
My solution to a stripped Jeep lug nut
Once the tin cap is torn out, and the nut is stripped, drive a 17mm socket with a hammer on it. Use epoxy, or a tack weld, for added grip, if necessary. -
Hopper needs a bath
Before going again, tomorrow. 🙂 -
Winter is coming! Time to have a shovel handy. 🙂
The one recovery tool to rule them all, when push comes to shove(L). -
Farm jack and mount installed
Between the high-lift jack and winch, there is now nowhere I can't get out of. 🙂 -
Wireless winch setup on Jeep JK Unlimited factory bumper
https://youtu.be/fqVb15nc-uI
The first of only two planned additional modifications to my Jeep Wrangler JKU is in: I’ve now installed my trusty Superwinch LP8500 (previously on XJ) right on the stock bumper, thanks to a neat 1/4″ steel winch plate by Rock Hard 4×4. I’ve also upgraded to a roller fairlead, from the standard hawse, which will be nicer on my cable. I’ve posted the wiring for the wireless add-on here previously.
